Categories

Telescopic folding tribunes There are 4 products.

trybuny-teleskopowe


We design, supply and install telescopic stands based on a modern folding system.

Supporting structure of the tribunes and roller system
The construction of the telescopic tribunes is based on a system of expanding frames. The driving frames are made of powder-coated steel profiles, supporting poles made of 80x40 mm profile. Thanks to the use of a frictionless roller system, the tribune is lightly folded, which can be folded even by one person.

The running frames are equipped with polyamide wheels with a polyurethane tread with a diameter of 100 mm in an amount of 4 pieces per frame. The right number of wheels causes that the point load on the floor is small (it is within 1 kN per wheel). The consecutive frames are guided by means of plastic retaining rollers with a diameter of 33 mm, which slide inside the profiled furrow in the next frame, which prevents the frames from jamming and guarantees smooth movements.

The frames are joined together using the back plates and front joists. The back part is made of a specially profiled sheet, 1.5 mm thick.

Platforms, front panels
Directly to the front beams and back plates, there are installed platform plates made of non-slip plywood, 18 mm thick, in brown color. In the case of finishing the tribune's transitions, the plywood and finishing with aluminum strips are used. From the front to the tribune, masking panels made of 18 mm thick board in gray RAL 7035 or other, according to the manufacturer's palette, are fastened.


Safety barriers
The tribunes are equipped with rear, side and front barriers, depending on the configuration of the tribune. Barriers are installed in a situation when the tribune is free-standing, or when there are unprotected spaces at the rear of the tribune.

Side barriers can be made in several variants:

- vertical barrier installed permanently - in the case of stands up to 5 rows;
- vertical barrier removable - in the case of stands over 5 rows;
- tiltable vertical barrier;
- oblique standing barrier - in the case of stands with number of rows above 5. Its use eliminates collision of railings during the assembly of the stand.


Seat

The tribune is equipped with plastic bucket seats. The upper two rows are equipped with seats with a medium backrest height of 24 cm, sliding rows are equipped with seats with a low backrest. After spreading the tribune's, the position of the tribune is determined by means of special locking feet, which are lowered by means of a rotary knob. The tribunes are equipped with system barriers made of a 35 mm diameter tube. The entrance steps of the additional intermediate stages are finished with a specially profiled grooved aluminum sheet, which increases the safety of people and improves the aesthetics of workmanship. The tribunes have all the necessary certificates and approvals.

Drive, folding
Standards up to 8 rows are normally folded manually.
In the case of tribunes with a number of rows over 8, we equip them with electric drive modules. In the case of electric power supply, it is suggested to make a dedicated grandstand power supply installation. In the absence of a dedicated installation, power and control of the stands can be done with the included power supply and control set.

Showing 1 - 4 of 4 items
  • Telescopic tribune with plastic seats. Intended: Indoor use - sports halls, spectacular and gymnastic halls.The basic features of the tribunes:Modern, safe and simple way of folding and unfolding, based on frictionless roller system Tribune can be folded and unfolded by only one person Modular construction (lenght: 300 cm - 600 cm, every 50 cm)...

    To order

  • Telescopic tribune with folding plastic seats (backrest 38 cm). Intended: Indoor use - sports halls, spectacular and gymnastic halls.The basic features of the tribunes:Modern, safe and simple way of folding and unfolding, based on frictionless roller system Tribune can be folded and unfolded by only one person Seats with backrest 38 cm hides together...

    To order

  • Telescopic tribune with plastic seats - type TTW-350. Intended: Indoor use - sports halls, spectacular and gymnatics halls. The basic features of the tribune:Modern, safe and simple way of folding and unfolding, based on frictionless roller system Tribune can be folded and unfolded by only one person Modular construction (lenght: 300 cm - 600 cm, every...

    To order

  • Telescopic tribunes with wooden benches. Intended: Indoor use - sports halls, spectacular and gymnastic halls The basic features of the tribunes:Modern, safe and simple way of folding and unfolding, based on frictionless roller system Tribune can be folded and unfolded by only one person Type seat: bench, made of plywood 18 mm thick, width 295 mm;...

    To order

Showing 1 - 4 of 4 items