Categories

Tribunes for sports facilities There are 17 products.

We design, supply and install sports tribunes for all types of sports facilities: entertainment and sports halls, auditoriums, pitches and stadiums. Certified structures meet all safety standards and have an attractive appearance. The configuration and design of the sports stand is prepared individually for each object.

Calculator of seat numbers for telescopic tribunes

Length of the tribune [m]:

(maximum 100 m)

Numbers of rows:

Result:

Number of seats:

Number of passage:

The results of calculation may be different from final project. This calculation is based on theoretical values. It is influenced by local conditions, seat layout, number of entries e.t.c.

Subcategories

  • Auditory telescopic tribune

    Trybuna teleskopowa audytoryjna


    We are a supplier of telescopic tribunes based on a modern folding system.
    Our tribunes are characterized by modern design and high look. The designing methods used by us allow us to customize all the material, geometric and dimensional parameters of the grandstands, such as the level difference, row spacing, module length, seat spacing, so we can adapt the grandstand to the stylistic expectations and individual architectural conditions of the facility.

    TT-ALFA SYSTEM

    System Description
    The system is dedicated for auditoriums, cinemas, theatres, as well as for sports halls to use in niches under balconies. A characteristic feature of this grandstand system is that after folding we get a flat surface, made of front panels along the entire height of the tribune. The platforms are built from the first row, each next platform have a level difference of min. 300 mm, each stairway is equipped with an intermediate step with a height of half of difference (150 mm).
    The advantage of the construction of our system is that the first lowest platform in the grandstand, which is entered, has a height of only 168 mm, so there is no need to add intermediate steps in front of the grandstand each time (the maximum height of the step is 175 mm for this type of facilities).

    Telescopic tribune

    Seat installation system

    Swivel joints enable quick upright positioning of the seat modules. The putting-down of the seats is done by quick pulling back the locks against accidental folding,  and unblocking the rotation by foot-pressing the strip located under the seats, which allows the seat-sets  to be laid flat.
    Next, the seat modules are quickly raised by raising them, the position is locked automatically, all you need to do is press and lock  the additional position locks with your foot to prevent accidental folding during use.

    Folding armchair, upholstered seat

    Armchairs

    The SPORTPLUS FLIP ® seats are a dedicated type of chair for the telescopic stands of the TT-ALFA system.  The armchairs are intended for installation in high-class sports and entertainment facilities, as well as in cultural facilities (cinemas, theatres). The gravitational folding mechanism with movable backrest ensures comfortable and ergonomic use, and saves the space between rows.
    The structure of the armchairs is made of laser-cutted steel and intermediate pylons common to subsequent armchairs. Profiled backrest made of plywood bent to a radius of R850 mm, thickness 10 mm, fully upholstered. Backrest fixing part made of 3 mm thick sheet metal, bent R850 mm. The back plate protects the back material from dirt at the back.
    Seat filled with polyurethane foam, fully upholstered, with an embroidered number of place on the frontal surface (optional).
    Armrest integrated with the whole, common to neighboring places. The spring assisted system of lowering and raising of the armrests, works automatically when any of the closest seats are occupied. Steel armrest construction, wooden finish with varnished / stained plywood 255x50 mm, thickness 10 mm, bent in the front to a radius of R50 mm.
    All mechanical connections are made of polyamide plain bearings (no contact between steel and steel).
    Dimensions of the armchairs:
    Axial spacing of seats: 525 mm
    Seat depth: 500 mm, backrest height above the seat - 500 mm.
    Height of raised/occupied chair: 910 mm, lowered/unoccupied: 790 mm.
    Total depth of the raised/occupied chair: 600 mm, lowered/unoccupied: 160 mm.

    Telescopic folded grandstand

    The supporting structure of the stands and the roller system.

    The construction of the telescopic tribune is based on the system of sliding frames. The traveling frames are made of powder-coated steel profiles, the support columns are made of 80x40 mm (up to 5 rows), 100x40 (6-11 rows) or 120x40 (12-18 rows). Thanks to the polyamide roller system, the grandstand folds slightly, so it can be pulled by one person.

    The driving frames are equipped with wheels and rolls:
     - traction on the floor: polyamide wheels with an additional polyurethane tread, with a diameter of 100 mm and a width of 40 mm, each equipped with two ball bearings, 4 wheels per frame.
    - upper guide supports: polyamide rolls with a diameter of 55 mm and a width of 33 mm, each equipped with two ball bearings.
    - lower guide, spacing and fixing the position of the frame relative to each other: polyamide with a diameter of 25 mm and a width of 10 mm, equipped with ball bearings.
    Increased number of wheels means that the floor's point concentrated force is low (below 1 kN per wheel). The mobile works and moves on only polyamide rolls with ball bearings, so all steel-steel contact points have been completely eliminated between subsequent frames, which makes the folding system work lightly, smoothly, quietly and with trouble-free operation.
    The supporting structure of the tribune is based on the girders made of a double 100x40 profile (200x40 mm in total), which is carries all loads of tribune.  The girders also act as risers, enclosing the platform space, which prevents objects falling from the platform under the bleacher.

    Folding telescopic tribune, folded seats
    Platforms and steps

    Platforms made of 18 mm anti-slip plywood in brown, black or gray are mounted directly to the front and rear beams. Optionally it is possible to cover the platforms with a carpet that is fixed and finished with aluminum slats or other individual finishes.
    Stairs in the staircase and intermediate steps are additionally finished with a 40 x 20 mm grooved aluminum stair profile, powder painted in the color of the structure. As standard, in the case of auditorium facilities, we offer modern LEDSTEP stair profile with a double anti-slip rope and bottom illumination in LED technology, in black or satin.

    Front panels

    Esthetic masking panels are installed on the front of the tribune, made of 18 mm thick gray (colored RAL 7035 or other) panel. On request, other finishing materials are also used, e.g. HPL board 8 mm, or MDF, e.g. perforated.

    Safety barriers

    The stands are equipped with rear, side and front barriers depending on the configuration of the stand. Side barriers are installed as standard starting from the second platform (in the first there is no need).
    Rear barriers are installed when the grandstand is free-standing or when there are unprotected spaces at the back of the grandstand (e.g. when the tribune is put beside the building's columns).
    In the case of permanently installed stands, alternatively, instead of rear barriers, the platform may be extended to the wall, completely closing the floor.

    Side barriers can be made in several variants:
    TYPE BT1: vertical barrier installed permanently - in the case of grandstands up to 5 rows.
    TYPE BT2: vertical barrier removable - for stands above 5 rows.
    TYPE BT3: vertical barrier articulated deflected: the railings are upright during use of the grandstand, they are unblocked for folding the grandstand and articulated deflected.
    TYPE BT4: fixed diagonal railing - for stands with more than 5 rows. The railing is made with a constant deviation of approx. 10 degrees. The collision-free position of subsequent barriers during folding eliminates the need to disassemble them.
    The railing frame is made of 35x35 mm square profile, frame corners bent to R99 mm radius, vertical infill made of 20x20x2 mm angle bars, max. 120 mm.

    Closed telescopic tribune, flatwall system

    Drive, folding

    Locking the grandstand's position after sliding or retracting is done by footers with a knob (except for electric folding stands where the positions are fixed permanently by a stopped engine with a drive unit)
    Stands (up to 5 rows) are normally folded manually.
    Optionally (from 6 rows as standard) we equip them with electric drive modules. The drive is a 230 / 400V three-phase motor, 0.25kW, 860 rpm, IP54, worm gear reducer i = 100. Cast iron transmission wheels diam. 200 mm with 80 mm wide polyurethane track, 70-75 Shore hardness, 2 pieces for one engine module. Depending on the configuration, one drive module supports about 6 running meters of stands. Individual drive modules work synchronously.
    It is suggested to make a dedicated tribune power supply installation. In the absence of a dedicated installation, power supply and control of the stands can be done using the included power supply and control set.

    We invite to view the movie presenting opening and closing of the tribune.

  • Telescopic tribunes for sports halls.

    Trybuna teleskopowa TT-BETA

    We are a supplier of telescopic tribunes based on a modern folding system.Our tribunes are characterized by modern design and high aesthetics. The design methods used by us allow us to customize all the material, geometric and dimensional parameters of the grandstand, such as the level difference, row spacing, module length, seat spacing, so we can adapt the grandstand to the stylistic expectations and individual architectural conditions of the facility.

    TELESCOPIC TRIBUNES TT-BETA SYSTEM



    Trybuna teleskopowa składana

    System Description

    The system is dedicated for sports halls as wall-fixed or mobile stands. A characteristic feature of this grandstand system is that the seats (benches or plastic buckets) are permanently installed to the grandstand structure. The platforms start from the second row, in the first lowest row viewers keep feet the sports floor. The platforms have a level difference from 320 to 400 mm, each platform in the staircase is equipped with an intermediate step with a height of different half of the difference (160-200 mm), the entrance to the first platform is via movable intermediate step.

    Seats, armchairs

    In the telescopic stands of the TT-BETA system, various types of seats and armchair systems can be used:

    1. Type TT-BETA-L. Bench type seats, made of 30 cm wide plywood bench, with the possibility of additional equipment with upholstery covers, as well as folding slat or plywood backs.

      Trybuna ławkowa składana

    2. Type TT-BETA-PN. Seats with low backrest H = 11 cm in folding rows, in the last two non-folding rows higher seats with backrest H = 25 cm can be used

    3. Type TT-BETA-PW. Plastic seats with backrest H = 25 or 32 cm, for construction reasons possible to use in the stands with the level difference of 350-400 mm, without front panels.
      Trybyna teleskopowa wielorzędowa

      4. Type TT-BETA-PS. Seats with folding backrest, seats and backrests made of blown polypropylene (in Blow-Molding technology). The backrest assemblies are folded down before closing the grandstands and upright after opening.

      5. Type TT-BETA-ST. Seats with folding backrest, seats and backs made of specially profiled plywood. The backrest assemblies are folded down before closing the grandstands and upright after opening. We offer additional upholstery covers for the seat and back.

    The supporting structure of the stands and the roller system


    Konstrukcja trybuny teleskopowej mobilnej

    The construction of the telescopic tribune is based on the system of sliding frames. The traveling frames are made of powder-coated steel profiles, the support columns are made of 80x40 mm (up to 5 rows), 100x40 (6-11 rows) or 120x40 (12-18 rows). With the polyamide roller system, the grandstand folds slightly, so it can be folded down even by one person.

    The driving frames are equipped with wheels and rolls:
    - traction on the floor: polyamide wheels with an additional polyurethane tread, with a diameter of 100 mm and a width of 40 mm, each equipped with two ball bearings, 4 wheels per frame.

    - upper guide supports: polyamide rolls with a diameter of 55 mm and a width of 33 mm, each equipped with two ball bearings.

    - lower guide, spacing and fixing the position of the frame relative to each other: polyamide with a diameter of 25 mm and a width of 10 mm, equipped with ball bearings.

    Increased number of wheels means that the floor's point concentrated force is low (below 1 kN per wheel). The mobile works and moves on only polyamide rolls with ball bearings, so all steel-steel contact points have been completely eliminated between subsequent frames, which makes the folding system work lightly, smoothly, quietly and with trouble-free operation.
    The supporting structure of the tribune is based on the girders made of a double 100x40 profile (200x40 mm in total), which is carries all loads of tribune. The girders also act as risers, enclosing the platform space, which prevents objects falling from the platform under the bleacher.

    Platforms and steps

    Stopnie trybuny teleskopowej

    Platforms made of 18 mm anti-slip plywood in brown, black or gray are mounted directly to the front and rear beams. Optionally it is possible to cover the platforms with a carpet that is fixed and finished with aluminum slats or other individual finishes.
    Stairs in the staircase and intermediate steps are additionally finished with a 40 x 20 mm grooved aluminum stair profile, powder painted in the color of the structure. As standard, in the case of auditorium facilities, we offer modern LEDSTEP stair profile with a double anti-slip rope and bottom illumination in LED technology, in black or satin.


    Front panels

    Panelowa trybuna teleskopowa

    Esthetic masking panels are installed on the front of the tribune, made of 18 mm thick gray (colored RAL 7035 or other) panel. On request, other finishing materials are also used, e.g. HPL board 8 mm, or MDF, e.g. perforated.


    Safety barriers


    The stands are equipped with rear, side and front barriers depending on the configuration of the stand. Side barriers are installed as standard starting from the second platform (in the first there is no need).
    Rear barriers are installed when the grandstand is free-standing (or movable) or when there are unprotected spaces at the back of the grandstand (for example when the tribune is put beside the building's columns or holes).
    In the case of permanently installed stands, alternatively, instead of rear barriers, the platform may be extended to the wall, crating complete floor.

    Side barriers can be made in variants:
    TYPE BT1: vertical barrier installed permanently - in the case of grandstands up to 5 rows.

    Trybuna teleskopowa TT-BETA-L

    TYPE BT2:
    vertical barrier removable - for stands higher than 5 rows.

    Bariera trybuny teleskopowej

    Trybuna składana


    TYPE BT3: vertical barrier articulated deflected: the railings are upright during use of the grandstand, they are unblocked for folding the grandstand and articulated deflected.
    TYPE BT4: fixed diagonal railing - for stands with more than 5 rows. The railing is made with a constant deviation of approx. 10 degrees. The collision-free position of subsequent barriers during folding eliminates the need to disassemble them.

    The railing frame is made of 35x35 mm square profile, frame corners bent to R99 mm radius, vertical infill made of 20x20x2 mm angle bars, max. 120 mm.



    Opening and closing the grandstand

    Locking the grandstand's position after opening or closing is made by footers with a knob (except for electric folding stands where the positions are fixed permanently by a stopped engine with a drive unit)

    Electric drive

    Stands (up to 5 rows) are normally folded manually.

    Silnik trybuny teleskopowej


    Optionally (from 6 rows as standard) we equip them with electric drive modules. The drive is a 230 / 400V three-phase motor, 0.25kW, 860 rpm, IP54, worm gear reducer i = 100. Cast iron transmission wheels diam. 200 mm with 80 mm wide polyurethane track, 70-75 Shore hardness, 2 pieces for one engine module. Depending on the configuration, one drive module supports about 6 running meters of stands. Individual drive modules work synchronously.
    It is suggested to make a dedicated tribune power supply installation. In the absence of a dedicated installation, power supply and control of the stands can be done using the included power supply and control set.

  • Tribunes folded up
  • Stationary tribunes for indor use

    Sports tribunes for closed buildings contain structures designed for sports halls, spectator halls or auditorium halls. Our design system allows you to adapt the audience to any type of sports facility. Certified, durable and aesthetic permanent tribunes allow for efficient use of the object's space and increase its utility rank.

  • Seats

    Plastic seats available in this section are offered in three main types: without backrest, with medium backrest and with high backrest. All models are made of polypropylene and have a solid support structure with additional reinforcements under the seat. Double rear panel significantly increases the resistance of seats to acts of vandalism. The seats are resistant to low and high temperatures as well as to UV radiation. All have a recess for attaching a number plate and a hole through which water is drained.

  • Tribunes for outdoor use

    One of the two most popular categories of sports tribunes are fixed structures for outdoor playing fields. Certified tribunes seats, each time designed individually for a given sports facility, are characterized by a durable, practical, user-oriented performance and flexibility in the configuration of seats, types of seats or the choice of colors.

  • Roofed stationary tribunes

    Sports arena roofing allows you to maximize its usability. The durable roof cover made of transparent polycarbonate panels increases its aesthetic qualities and durability. As a manufacturer, we offer the execution of the whole roofed construction or the installation of a roof to an existing facility.

  • Stationary mobile tribunes

    The system of mobile, demountable sports tribunes allows for easy construction wherever time matters. A simple, solid construction can be assembled in any place requiring an ad hoc audience. In addition, the use of special handles in the elements of the mobile stand allows for quick assembly / disassembly, without the use of external connecting elements and specialized tools.

  • Seating for viewiers

    Seating for viewers allow you to create a small auditory space almost anywhere. The structures we manufacture are designed for all types of objects (closed and open). A simple, flexible design allows you to quickly adjust the number of places to the needs of the customer, maximizing the usability of the bench.

  • Special tribunes

    Many years of design experience allows us to undertake the implementation of unusual sports tribunes designs. Our design system allows you to make modifications to the tribunes, according to the wishes of the customer, while maintaining the technical, quality and aesthetic values ​​of the construction. The following realizations are an introduction to our offer. All questions regarding the implementation of special orders should be directed to the technical and commercial department.

per page
Showing 1 - 12 of 17 items
  • Telescopic tribune with plastic seats. Intended: Indoor use - sports halls, spectacular and gymnastic halls.The basic features of the tribunes:Modern, safe and simple way of folding and unfolding, based on frictionless roller system Tribune can be folded and unfolded by only one person Modular construction (lenght: 300 cm - 600 cm, every 50 cm)...

    To order

  • Telescopic tribune with folding plastic seats (backrest 38 cm). Intended: Indoor use - sports halls, spectacular and gymnastic halls.The basic features of the tribunes:Modern, safe and simple way of folding and unfolding, based on frictionless roller system Tribune can be folded and unfolded by only one person Seats with backrest 38 cm hides together...

    To order

  • Telescopic tribunes with wooden benches. Intended: Indoor use - sports halls, spectacular and gymnastic halls The basic features of the tribunes:Modern, safe and simple way of folding and unfolding, based on frictionless roller system Tribune can be folded and unfolded by only one person Type seat: bench, made of plywood 18 mm thick, width 295 mm;...

    To order

  • Telescopic tribune with plastic seats - type TTW-350. Intended: Indoor use - sports halls, spectacular and gymnatics halls. The basic features of the tribune:Modern, safe and simple way of folding and unfolding, based on frictionless roller system Tribune can be folded and unfolded by only one person Modular construction (lenght: 300 cm - 600 cm, every...

    To order

  • Stationary tribunes with plastic seats. Intended: Indoor use - sports halls, spectacular and gymnastic halls.  The basic features of the tribunes:Steel structure, the structure of the tribune is made of closed steel profiles (transverse frames, connectors, brackets for attaching seats), Individual design -the tribune is each time designed and adapted...

    To order

  • Stationary tribune with a riser and plastic seats  - type TSH 200 Intended: Indoor use - sports halls, spectacular and gymnastic halls. The basic features of the tribunes:Steel structure, the structure of the tribune is made of closed steel profiles (transverse frames, connectors, brackets for attaching seats), powder coated Individual design -the...

    To order

  • Stationary tribune with wooden benches Intended: Indoor use - sports halls, spectacular and gymnastic halls.  The basic features of the tribunes:Steel structure, the structure of the tribune is made of closed steel profiles (transverse frames, connectors, brackets for attaching seats), powder coated Individual design -the tribune is each time designed...

    To order

  • Stationary tribune with plastic seats dedicated for outdoor use. Intended: Outdoor use - sport fields, stadiums.  The basic features of the tribunes:The construction of the stationary tribune is made of steel profiles, protected against weather conditions by hot dip galvanizing Lattice platform type VEMA, made of hot dip galvanized steel (optional...

    To order

  • Stationary tribune with a riser and plastic seats - type TSD 200. Intended: Outdoor use - sport fields, stadiums.  The basic features of the tribunes:The construction of the stationary tribune is made of steel profiles, protected against weather conditions by hot dip galvanizing Lattice platform type VEMA, made of hot dip galvanized steel (optional...

    To order

  • Stationary mobile tribune for outdoor use with plastic seats, type TMZ.Intended: Open sport facilities - sport fields, stadiums.The basic features of the tribunes:Tribunes designed for quick assembly and disassembly, flexible in the configuration of the audience Modular constructionThe tribune is intended for assembling on the hardened ground.The...

    To order

  • Roofed stationary tribune with plastic seats. Intended: Outdoor use - sport fields, stadiums. The basic features of the tribunes:Tribune with 3 or 4 rows The construction of the stationary tribune is made of steel profiles, protected against weather conditions by hot dip galvanizing Roofing: colorless cellular polycarbonate plates 8 mm thick, coated...

    To order

  • Stationary tribune with plastic seats and a riser - type TSH 200, it is mounted to oblique beams. Intended: Indoor use - sports halls, spectacular and gymnastic halls. The basic features of the tribunes:Special tribune model, mounted to oblique beams in the sporta hall Steel structure, the structure of the tribune is made of closed steel profiles...

    To order

Showing 1 - 12 of 17 items